Inflatable Party Marquee for Wedding

This is Inflatable Oxford Cloth Globe Tent  we made it for our UK customer .The measurement is 10 m in diameter with 210 D oxford cloth which is waterproof .The inflatable oxford dome tent is with two entrance , front is the main entrance and the Behind the safety exit .

it will take 5 mins to set up the inflatable dome tent on the ground . The advantage of the oxford fabric is with light weight .The portable dome tent easily easily be assembled and disassembled by 1-2 people .

We also can install the colorful LED light in the wall to decorate to tent

All kinds outside activities.  1.party .  2.sunshade .   3.exhibition 

 

CE Certificate for the Blower and Tent :


Design:
As a professional supplier of inflatable products, and holding lots of professional and experienced designers in our team, we have been providing our customers best customized service from start to finish.

 

Printing :
we adopt the best binding digital printing machine imported to cover a thin membrane on printings keeping the printing products more beautiful and attractive to assure the quality passed the SGS test and lead -free .

 

Automatic cutting machine :
We use the automatic cutting machine cut the pvc materials so that We are able produce more precise ,more beautiful and more reliable inflatable products in a short time 

 

Technology :

Sewing : we adopt special double needle strong thread sewing anywhere and quadruple stitching in positions sustaining much force and pressure for the tent .

How to build up the Tent :

1.To find  space , long , wide and high enough to place the tent on the ground .
2.Clean up the site, not allow have sharp objects and high-voltage wires to keep safety .
3.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the tent from sundries .
4.Spread out and flatten the tent on the ground .
5.Connect the air inlet of inflatable tent and the outlet of blower tightly, and then tight alternative air inlet with a rope.
6.When the blower switched on, inflatable tent will be inflated within 10-30 minutes (depend the size of the tent ).
7.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .

B :How to Repair the inflatable tent when it was be broken ?
A: If you find a leak, you can wipe the surface first with suds to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance pvc materials and then brush dispensing, to be dry after the paste on the leak, The If the leak at the joint part can be divided into the following steps:
1, first clean up the bonding surface.
2, The Glue and the pvc materials will be in the repair kit . Just let the glue do its job, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3, the shape of the patch to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4, to be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.