Inflatable Slip and Slide Super Inflatable Water Slide for Grass

The inflatable water slip N slide is 16m long and 3m width  with 1 lane (of course it can be double laneas well as triple ) is made by 0.55mm PVC tarpaulin which is strong tension .Only once inflate by the air pump
Depend upon this tyle inflatable city water slide , it must be built up on a slipe with 15-30 angles ,both street and hill , so that people can freely slide to the end with water .Climb up ,tumble down ,shake yourself off and try again , onece your are successful and reach the top of the city slide you are reagy to slide down . Of course you can add some soap foam on the slide to make it more smooth and Slippery or all kinds of swim ring to push you fast to slide.In addition , when people are playing , you need to sparay water with the water pipe . All the inflatable slides manufactured by Guangzhou Joy Inflatable Limited are so much fun for kids as well as big-kids wanting to have a blast. All of our inflatable slides are suitable for a variety of ages.   








  Connect part :

When it was be set up :




                Stitch                                                   Reinforced Strip                                Anchor and D Ring
Double stiching everywhere and quadruple           We made reinforce strip at the bottom joiny       Each inflatable product will be equipped with anchor
at bottom stress point to ensure the inflatables       at each conner to ensure safety                        ring for fixation
are strong enogh


Certificate :
      CE certificate for the blower                                                           CE  Certificate for the Slide


FAQ:
A:How to build up the inflatable slide :
1:To find  space , long , wide and high enough to place the inflatable slide on the ground .
2.It would be much better if put a cushion under it such as carpets, plastic color cloth protect the inflatable slide from sundries .
3.Spread out and flatten the slide on the ground .
4.Connect the air inlet of inflatable slide and the outlet of blower tightly, and then tight alternative air inlet with a rope.
5.When the blower switched on, inflatable tent will be inflated within 10-20 minutes (depend the size of the slide ). Keep the blower inflate all the time during the use
6.If there is a wind, fill the sandbag and tie it to D-rings on the bottom of the tent or tie the Stakes to D-rings on the bottom and insert the stakes in the soil .


B :How to Repair the inflatable slide when it was be broken ?
A: If you find a leak, you can wipe the surface first with suds to check the leak. Leakage point If it is a small hole, you can use a small piece of circular maintenance pvc materials and then brush dispensing, to be dry after the paste on the leak, The If the leak at the joint part can be divided into the following steps:
1, first clean up the bonding surface.
2, The Glue and the pvc materials will be in the repair kit . Just let the glue do its job, must be painted evenly, the thickness of the appropriate brush map twice, you can Sticked up.
3, the shape of the patch to be designed into a circular or oval, try to avoid the square and acute angle interface shape, lap width can not be less than 30mm.
4, to be glue after evaporation, can be bonded, patch to be flat, no wrinkles, rolling, scraping, while the supply of heat with the hair dryer, easy to bond. Adhesive after 6 hours can be inflated.